Device Manual CANlink wireless
Getting started
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0 34
© 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016 PROEMION GMBH > 1.0 EN > Device Manual CANlink wireless 3000 series
4.2 Connecting the device
WARNING
Overload damage due to malfunction.
Severe injury or death.
To limit power in the event of malfunction, secure the DC power supply circuit during
installation with an external 5 A fuse.
NOTICE
Property damage.
The device must be installed, connected, and commissioned by a qualified technician.
Ensure the power supply is disconnected before connecting the device.
Only use components from the starter kits or the accessories supplied. See chapters
Starter kits and Software and accessories.
If you have any questions, please contact our support team before getting started. See
chapter Service and support.
To Next Page
Loading...
