Device Manual CANlink wireless
Getting started
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0 56
© 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016 PROEMION GMBH > 1.0 EN > Device Manual CANlink wireless 3000 series
7. In the DEVICE CONFIGURATION field, check the ENABLE box.
8. In the D
EVICE NAME box, add the serial number of the connected device.
9. Click the D
EVICE tab.
10. Alter the configuration of your application as required. In particular, adapt the CAN
baud rate to the target system.
11. Choose F
ILE → SAVE CONFIGURATION from the menu.
12. Save the configuration to a file.
13. Choose D
EVICE → WRITE DATA TO THE DEVICE from the menu.
To Next Page
Loading...
