Device Manual CANlink wireless
Getting started
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0 85
© 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016 PROEMION GMBH > 1.0 EN > Device Manual CANlink wireless 3000 series
12. In the SOCKET SERVER field, check the ENABLE BOX.
13. In the P
ORT NUMBER box, enter the value 30000.
14. In the P
ROTOCOL list, select the TCP network protocol.
15. Choose F
ILE → SAVE CONFIGURATION from the menu.
16. Save the configuration to a file.
17. Choose D
EVICE → WRITE DATA TO THE DEVICE from the menu.
The configuration is written to the device.
18. Disconnect the device from the PC.
19. Quit CANlink wireless Configurator.
The configuration of the master device is comleted. Now the CAN-CAN-WLAN Bridge
is prepared.
INFORMATION
Switch both devices on and the radio connection between them is automatically estabished.
The indicator LED displays the status "WLAN or Bluetooth connection active" (steady
green), see also chapter Indicator elements (LED).
To Next Page
Loading...
