ProMinent gamma XL User Manual

Tab. 2: Identifier and error displays:
Identifier Meaning
The pump is working or waiting for a starting signal.
The pump was manually stopped using the
[STOP/START] key.
The pump was remotely stopped (Pause) - via the "External" socket.
The pump was stopped by an error.
Only with cyclical batch metering: the pump is waiting for the next cycle.
Only with
‘Access. protect’ : the pump software is locked.
‘AUX’ The pump is currently pumping at auxiliary capacity and/or auxiliary frequency.
‘memory’ Only in ‘CONTACT’ and ‘BATCH’ operating modes:
The "Stroke memory" auxiliary function has been set.
The pump is in
‘ANALOGUE’ operating mode.
The
‘Curve è linear’ type of processing is set.
The pump is in ‘ANALOGUE’ operating mode.
The
‘Curve è Upper side band’ type of processing is set.
‘Metering è Discharge stroke è optimum’ metering profile has been set.
‘Metering è Discharge stroke è fast’ metering profile has been set.
‘Metering è Discharge stroke è sine mode’ metering profile has been set.
‘Metering è Discharge stroke è continuous’ metering profile has been set.
‘Metering è Discharge stroke è DFMa’ metering profile has been set.
‘Metering è Discharge stroke è normal’ metering profile has been set.
Overview of equipment and control elements
20

ProMinent gamma XL Specifications

General

Brand	ProMinent
Model	gamma XL
Category	Water Pump
Language	English