RLX2 Industrial Hotspot Series
ProSoft Technology, Inc. Page 111 of 212
June 15, 2015
Select the type of certificate that you will be uploading. It is important that
this is set correctly as the RLX2 does not distinguish between them in any
other way.
If the certificate is encrypted, enter the passphrase that was used to create it
on the RADIUS server.
Browse to locate the certificate file on the local PC that is to be uploaded.
Configuring the RLX2 Repeaters with Certificates
Obtain the required certificate files from your IT person and use the following procedure
to upload these files to the RLX2 Repeater.
1. Open the web page for the RLX2 repeater that you want to configure.
2. Select the EAP Method (PEAP or EAP-TLS).
3. Enter the Username.
To Next Page
Loading...
Need help?
General
