RLX2 Industrial Hotspot Series
ProSoft Technology, Inc. Page 179 of 212
June 15, 2015
RLX2-IHW Detailed Specifications
Radio
Frequency Band
(Varies by country)
802.11b/g:
2.412 GHz to 2.462 GHz (FCC)
2.412 GHz to 2.472 GHz (ETSI)
802.11a:
5.150 GHz to 5.250 GHz (FCC/ETSI)
5.725 GHz to 5.850 GHz (FCC)
802.11a, 802.11b, 802.11g, 802.11i
Transmit Power (Programmable)
(varies by country)
Up to 50 mW without amplifier
Up to 500 mW with optional amplifier. (not applicable
for hazardous locations)
Channel data rates (Modulation)
802.11b: 11, 5.5, 2, 1 Mbps
(DSSS - BPSK, QPSK, CCK)
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps (OFDM)
802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps (OFDM)
Receiver Sensitivity (Typical)
-90 dBm @ 1 Mbps
-85 dBm @ 11 Mbps
-82 dBm @ 24 Mbps
-75 dBm @ 54 Mbps
1 to 13 (802.11b/g)
36, 40, 44, 48, 149, 153, 157, 161, 165 (802.11a)
WPA2 - 802.11i with 128 bit AES-CCM
Legacy WPA TKIP, WEP support
MAC ID filter
Admin password
Physical
Extruded aluminum with DIN and panel mount
14.8 x 11.8 x 3.8 cm (H x W x D)
5.82 x 4.64 x 1.48 in (H x W x D)
IEC 60068 2-6 (20g, 3-Axis)
IEC 60068 2-27 (5g, 10 Hz to 150 Hz)
One 10/100/1000 Base-T connector, shielded RJ45
Environmental
-40°C to +75°C (-40°F to +167°F)
Up to 100% RH, with no condensation