RLX2 Industrial Hotspot Series
ProSoft Technology, Inc. Page 187 of 212
June 15, 2015
The antenna pattern is a beam pointed away from the concave side of the dish.
Beamwidth and antenna gain vary with the size of the reflector and the antenna
construction. Typical gain values are 15 to 30 dBi.
The antenna polarity depends on the feed antenna polarization.
RLX2 Approved Antennas
In the U.S. and Canada, use antennas that are specifically approved by the U.S. Federal
Communications Commission (FCC) and Industry Canada for use with the RLX2 radios.
Contact ProSoft Technology or visit www.prosoft-technology.com for a current list of
approved antennas.
Whip
Collinear array
Yagi array
Parabolic reflector
Antenna selection depends on whether the bi-directional amplifier is being used or not.
For each approved antenna, there is a specified minimum distance the antennas must
be separated from users for safe exposure limits, according to FCC part 2.1091.
Approved antennas in Europe and other countries accepting CE
Approved antennas in Mexico
To Next Page
Loading...
Need help?
General
