ProSoft Technology RadioLinx RLX2-IHW

RLX2 Industrial Hotspot Series
Page 58 of 212 ProSoft Technology, Inc.
June 15, 2015
 Increase the radio's transmission power, cable the radio to the Configuration PC,
and reconfigure it
 Select a new location for the Remote radio and/or its antenna
 Decrease the length of antenna cable
 Determine and resolve sources of "electrical" noise which may be interfering with
the radio transmission
 Add a repeater between the radios that are not communicating, or reconfigure an
existing radio as a repeater if line of sight is available