RLX2 Series ♦802.11a, b, g, n Start Here
Industrial Hotspots User Manual
ProSoft Technology, Inc. Page 15 of 161
May 8, 2013
1.3 Package Contents
1.3.1 Standard Contents
The following components are included with standard RLX2 radio products:
RadioLinx
®
RLX2 802.11 Industrial Hotspot
MicroSD card with default factory
configuration (installed in radio when
shipped)
Mating power connector for the RLX2
radios,forattachmenttocustomer’spower
supply.
Power Connector
Wiring Tool
Tool to assist wiring the power connector.
2 dBi Omni RP-SMA articulating, 2.4/5GHz.
This antenna is suitable for all RLX2 radio
products.
Contains sample programs, utilities,
firmware images, and documentation for
RadioLinx
®
products.
1.3.2 Industrial Hotspot Bench Test Kit (RLX-IHBTK)
The standard radio products are intended for deployment into production
systems and do not include accessory power supplies or cables. For bench
testing of radios, an optional bench test kit provides these accessories:
AC Power Adapter, 12V1.6A w/2 pin & 4
plug Set
5 foot Ethernet Straight-Thru Cable
6 foot RS232 serial cable
RS232 null modem serial adapter
Important: Before installing, please verify all listed product items are present. If any of these
components are missing, please contact ProSoft Technology Support for replacements.
To Next Page
Loading...
Need help?
General
