Detailed Radio Configuration / Diagnostics RLX2 Series ♦ 802.11a, b, g, n
User Manual Industrial Hotspot
Page 86 of 161 ProSoft Technology, Inc.
May 8, 2013
6.4.2 Change password
Enter the current password in this field. The default password is
"password" (lower case, no quotes). This entry must exactly match the
current password, otherwise the change will be rejected.
Enter the new password in this field. Passwords are case sensitive.
Confirm the new password in this field. This entry must exactly match
the password entered in the "New" field, otherwise the change will be
rejected.
Saves the changes and updates the radio configuration.
Discards the changes without updating the radio configuration.
Any alphanumeric value between one and 31 characters can be entered. The
password is case-sensitive.
If the password cannot be found, changes the radio settings cannot be done. To
revert back to the default password, see the Troubleshooting section.
6.5 Apply Changes
Click the Apply Changes button to save the changes after editing radio
configuration in order for those changes to take effect. When changes are
applied, the radio will shut down and restart using the new settings.
To Next Page
Loading...
Need help?
General
