RLX2 Series ♦802.11a, b, g, n RadioLinx Industrial Hotspot Browser
Industrial Hotspots User Manual
ProSoft Technology, Inc. Page 89 of 161
May 8, 2013
7 RadioLinx Industrial Hotspot Browser
In This Chapter
Primary radio functions .......................................................................... 90
File Menu ............................................................................................... 91
Operations Menu ................................................................................... 93
Dialogs Menu ........................................................................................ 97
View Menu ........................................................................................... 102
Help Menu ........................................................................................... 112
The IH Browser finds any radio connected to the network. It can also see basic
settings and change the IP address. Access to theradio’sWebpage can be
done. For more information, see Primary radio functions (page 100).
The List view (shown in the illustration) appears with a list of any radios on the
same network as the computer running the IH Browser. If a known radio cannot
be seen, click the Scan (page 922) button in the tool bar or select Scan from the
File menu.
The preceding illustration shows the List View. Refer to Topology view (page
106) to see alternate views.
To clear all the radios from the list, click the Erase button in the tool bar or select
Clear from the File menu. Refreshing the list is done by clicking Scan.
If there is trouble viewing radios in the IH Browser, see Troubleshoot missing
radios (page 48).
To Next Page
Loading...
Need help?
General
