Proyecson PAA20+ - Firmware Versions

10 FIRMWARE VERSIONS
• PAF O.1:
o Fully compatible with Dolby servers using serial port.
o Fully compatible with the Doremi servers automation using
serial port and Ethernet connection.
o Fully compatible with the Qube XP-D and Datasat DC-20 servers
automation using serial port. *
o Fully compatible with GDC servers automation using Ethernet
connection.
• PAF 1.0:
o Individual time setting for all the relay pulse outputs.
o Different message terminators for inputs and outputs.
o Remote update function.
o Tester and Programmer software.
• PAF 1.1:
o Serial number and firmware version visible in the WebAdmin.
o First Production Version Release.
• PAF 1.1b:
o It is possible to configure output pulses up to 65 s.
o Known issue: Backup/Upload doesn’t work.
• PAF 4.2.x:
o GUI redesigned.
INSTALLATION MANUAL: PAA20+ V 2.0 (10/2021) 116