APPENDIX I: COMMANDS FOR BARCO ALCHEMY (ICMP) REMOTE
PLAYER MANAGEMENT.
- PLAYER and PROJECTOR are factory defined devices in an Alchemy (ICMP)
server.
Device Command Action
PLAYER PLAYER.Play; Plays loaded show
PLAYER PLAYER.Pause; Pauses current playback
PLAYER PLAYER.Stop; Stops current playback
PLAYER PLAYER.Pause (seconds),s; Pauses playback during “s” seconds
PLAYER PLAYER.Resume; Resumes current playback
PLAYER PLAYER.Emergency Stop; Sets an error, forces the manual
mode, stops the player and triggers
automation events associated with
Emergeny Stop
PLAYER PLAYER.Enable Schedule; Sets the schedule mode on
PLAYER PLAYER.Disable Schedule; Sets the schedule mode off
PROJECTOR PROJECTOR.Close Dowser; Close the projector dowser
PROJECTOR PROJECTOR.Open Dowser; Open the projector dowser
PROJECTOR PROJECTOR.Turn Lamp On; Turn the projector lamp on
PROJECTOR PROJECTOR.Turn Lamp Off; Turn the projector lamp off
PROJECTOR PROJECTOR.Execute
Macro,”M”;
Executes the “M” macro on the
projector.
INSTALLATION MANUAL: PAA20+ V 2.0 (10/2021) 148
To Previous Page
Loading...