Proyecson PAA20+ - Appendix D: Paa20+ Tester and Programmer Software; Ap D.1 Hardware Requirements; Ap D.2 Installation

APPENDIX D: PAA20+ TESTER AND PROGRAMMER SOFTWARE.
The Tester and Programmer software for the PAA20+ is a utility to tests the
input and output capabilities of the device and to update the firmware.
The software may be downloaded from this link:
ftp://manual:proyecson@ftp3.proyecson.com/manual/paa20+
AP D.1 HARDWARE REQUIREMENTS.
• PC or Laptop with Ethernet connection.
• Windows XP or higher.
AP D.2 INSTALLATION
The program is an executable that does not need installation. You only need
to copy the PAA20TP.exe and TFTPClient.dll files inside a folder in your PC
and execute then the former one. You can see these files inside a folder in
the Figure AP.DA.
Figure AP.DA
INSTALLATION MANUAL: PAA20+ V 2.0 (10/2021) 125