Proyecson PAA20+ - Appendix G: Qube Automation Files Examples

APPENDIX G: QUBE AUTOMATION FILES EXAMPLES.
AutomationDevices.xml:
 <?xml version="1.0" encoding="utf-8" ?>
- <Devices xmlns="http://schemas.qubecinema.com/Automation/Devices/2008-
01-26">
- <Device name="sp" class="Qube.Automation.StreamDevice.TCP" enable="true">
- <Configuration>
 <Key name="File" value="CP650.xml" />
 <Key name="Address" value="10.0.0.132" />
 <Key name="Port" value="61412" />
 <Key name="KeepAlive" value="OFF" />
 </Configuration>
 </Device>
- <Device name="PAASERIES" class="Qube.Automation.StreamDevice.Serial"
enable="true">
- <Configuration>
 <Key name="File" value="PAASERIES.xml" />
 <Key name="Settings" value="COM1,9600,n,8,1" />
 </Configuration>
 </Device>
- <Device name="projector" class="Qube.Automation.Barco.TCP, Barco"
enable="true">
- <Configuration>
 <Key name="File" value="Barco.dll" />
 <Key name="Address" value="10.0.0.129" />
 <Key name="Port" value="43728" />
 <Key name="KeepAlive" value="OFF" />
 </Configuration>
 </Device>
 <Device name="Me" class="Qube.Automation.SMS, Dalapathi" enable="true" />
 </Devices>
INSTALLATION MANUAL: PAA20+ V 2.0 (10/2021) 134