MP3-PL Therapy Beam Analyzer T41050
Illustrations
Figure 1: Definition of patient environment 13
Figure 2: MP3-PL System with accessories for measurements with 24 PinPoint chambers 15
Figure 3: MP3-PL System with accessories for measurements with a measuring and a reference detector 16
Figure 4: MP3-PL Perspex tank with junction box and moving mechanism (top: front view; below: rear view) 17
Figure 5: Connections at the junction box 18
Figure 6: Positioning device for tank alignment 19
Figure 7: Assembling SCANLIFT, positioning device, chamber cable holding device and Perspex tank 22
Figure 8: Mounting the A-axis 24
Figure 9: Mounting the B-axis 25
Figure 10: Mounting the C-axis 26
Figure 11: Inserting the 24 PinPoint chambers into the 3D-detectorblock 28
Figure 12: Vertical mounting of the 3D-detectorblock with 24 PinPoint chambers 29
Figure 13: Horizontal mounting of the 3D-detectorblock with 24 PinPoint chambers 29
Figure 14: Inserting the 24 PinPoint chambers into the linear detector holder 30
Figure 15: Vertical mounting of the linear detector holder with 24 PinPoint chambers 31
Figure 16: Horizontal mounting of the linear detector holder with 24 PinPoint chambers 32
Figure 17: Horizontal mounting of the Bragg Peak chamber 33
Figure 18: Vertical mounting of the Bragg Peak chamber 34
Figure 19: Laying and bundling of the chamber cables 35
Figure 20: Chamber cable holding device T20015.1.200 36
Figure 21: Mounting the reference detector 37
Figure 22: Mounting the reference detector holder 38
Figure 23: Mounting the inhomogeneous phantom T43031 39
Figure 24: Mounting the hemisphere T41029.3.231 39
Figure 25: Mounting the wedge T41029.1.220 40
Figure 26: Mounting the film holding device T40040 40
Figure 27: Coupling of the plastic hose of the water reservoir 41
To Next Page
Loading...
