Page 42
Verify Communications
Until comms is established the signal LED’s are solid red, when comms is established
the signal LED flashes yellow the frequency of the flash indicates signal strength.
When testing the Gateway and Node, ensure all radios and antenna are at least two
metres apart or communications may fail.
Signal Strength indicator.
Blink Rate Signal Strength
Every 1/8 sec Fewer than 3% missed packets
Every 1/4 sec Between 3% and 25% missed packets
Every 1/2 sec Between 26% and 50% missed packets
Every 1 sec More than 50% missed packets
To Next Page
Loading...
Need help?
General
