System first start-up BES X installation manual
100 P/N: 400288005; Rev: L, 09/21
12.1 Lane setup parameters screen – brief description
Available: uncheck this option if the lane is not available (when the 4HD/5HD-CPU serves a single lane instead
of a pair of lanes).
Pair in Open mode: allow the lane to be opened in pair mode from the all lane screen.
Pair in League mode: allow the lane to be opened in pair mode from the league software.
Bowling type: specify the bowling type for the lane (Ten-pin, Five-pin, Duckpin, Candlepin, Highway-66).
Serial number: insert here the serial number of the 4HD/5HD-CPU operating on this pair of lanes (or lane).
HyperBump: enables the HyperBumpers on this lane. NOTE: Check (enable) this option ONLY if a
HyperBumper system has been purchased and installed.
Keyboard: select the specific model of keyboard console installed on this lane.
The available models are:
NONE: no consoles are installed on the lanes;
To Next Page
Loading...