QubicaAMF 400288005 - 2 Overhead Monitors Micro I Console

BES X installation manual Single channel video server
P/N: 400288005; Rev: L, 09/21 85
10 Single channel video server
10.1 288201089 wiring
The 288201089 single channel video server unit is the hardware needed to broadcast a video signal from a
single source to the BES X system. The video signal is broadcast in 720x576 (Standard Definition) for a PAL
video signal and 720x480 (Standard Definition) for a NTSC video signal.
The 288201089 unit has a Static IP address pre-assigned by QubicaAMF.
The default IP address of the 288201089 unit is:
• IP Address: 192.168.216.201;
• Subnet Mask: 255.255.248.0.
NOTE: the 288201089 unit must be the only video server unit installed in the center.
T.90.247 – 288201089 single channel video server
Serial
+5V
Model 2453S Video ServerOut In
Out Mic In
TO MAIN
SCORING NET
SWITCH
CABDATLANPC
FROM TUNER
VIDEO SOURCE
CNTADABNCRCA
C
A
B
R
C
A
M
M
C
A
B
M
M
R
C
A
S
T
E
2
1
3
5
Power cord suppliedNOT
by QubicaAMF