BES X installation manual Replacements
P/N: 400288005; Rev: L, 09/21 129
Click on the Lanes selected box.
In the screen that appears, select ONLY the pair of lanes where the SuperTouch console has
been replaced and click OK.
On the Upload to Lanes screen click on Reinitialize.
Click on Yes when the Warning message appears.
The Reinitialize procedure will now start.
IMPORTANT: This procedure will take more than an hour to finish. DO NOT switch off the BES X system
during the Reinitialization process.
The system will reboot when the Reinitialization process has finished.
To Next Page
Loading...