19
ESP-LXME Controller
Section C - System Diagnostics
Test All Stations/Check System
Review and conrm scheduled irrigation Programs, Program Run
Times and Station Run Times.
Confirm Programs
The ESP-LXME controller can make calculations and provide feedback
on Start Times and total Run Times for programs and stations.
Program Summary
Review program information for all programs:
Turn the controller dial to Test All Stations/Check System.
A
The Check System screen appears with Conrm Programs
selected; press Next.
B
The Conrm Programs screen appears with Program Summary
selected; press Next.
1 2
C
The Program Summary screen appears, providing a summary of
Run Times, Start Times and Water Days for all programs.
3
NOTE: In the above example, Program A will run because it has
Station Run Times, Start Times and Water Days all programmed, as
indicated by the “Y” in each column for PGM A.
Program B however will not run as it is missing both the Run Time
and Start Time, as indicated by the “N” in each of those columns
for PGM B.
To Next Page
Loading...
Need help?
General
