69
ESP-LXME Controller
Enable (or Disable) FloWatch
TM
Turn the controller dial to Module Programming.
A
The Smart Module PGM screen appears with Flow Smart Module
selected; press Next.
B
The Flow Smart Module PGM screen appears. Use the Down
Arrow to select FloWatch On/O; then press Next.
1 2
C
The FloWatch screen appears. Press the On button to enable
FloWatch, or else press O to disable
3
NOTE: Once FloWatch is enabled we recommend that you Learn
Flow for all stations if you have not already done so. This will allow
FloWatch to react appropriately to the SEEF and SELF settings.
To Next Page
Loading...
