83
ESP-LXME Controller
Restore Defaults
Restore the ESP-LXME controller’s factory default settings.
Turn the controller dial to Clear Programs.
A
The Clear Programs screen appears. Press the Down Arrow button
to select Restore Defaults; then press Next.
B
A conrmation screen appears. To Restore Factory Defaults, press
and hold down the Yes button for four seconds. If you’re not sure,
press No.
1 2
C
A conrmation screen appears.
3
CAUTION: Be very careful about using the Restore Defaults
option as all previous settings will be permanently cleared from
system memory. Consider using the Clear All Programs option
instead.
To Next Page
Loading...
