73
ESP-LXME Controller
View Flow Rates
Occasionally you may want to view ow rates for a station or the water
source.
Turn the controller dial to Module Status.
A
The Smart Module Status screen appears with Flow Smart Module
selected; press Next.
B
The Flow Module Status screen appears. Press the Down Arrow
button to select View Flow Rates; then press Next.
1 2
C
The Flow Rates screen appears with View Station Rates selected;
press Next.
D
The Station Flow Rates screen appears. Press the + and – buttons
to select the desired station number. The normal ow rate for
each station will display to the right, and the source of the ow
rate (Learned or User Entered) displays below it.
3 4
NOTE: POC rate is the maximum ow rate for the water source.
To Next Page
Loading...
