Rain Bird ESP-LXME - Start Program Manually

85
ESP-LXME Controller
Start Program Manually

Turn the controller dial to Manual Watering.
A
The Manual Watering screen appears. Press the Down Arrow
button to select Start Program; then press Next.
B
The Manual Watering Start Program screen appears. Press Run to
start the Program or else press Back to cancel.

NOTE: If the desired program is not selected, use the Program
Select switch to change it. See Section B, Program Select Switch
for more details.
1 2
C
A conrmation screen appears.
3

Repeat this process to manually start other Programs. Programs
will run sequentially in the order in which they were selected.

NOTE: To view the Program while running, turn the controller
dial to AUTO position. You can use the Adv button to advance to
the next station and the + and – buttons to increase or decrease
the Run Time of the current station.