66
ESP-LXME Controller
G
Press the Yes and No buttons to select the stations you would like
to include. Press Next and Back buttons to select stations; then
press Next.
H
Press the + and – buttons to set the time delay for when you want
the Learn Flow exercise to start; then press Start.
Press and HOLD buttons to accelerate settings for hours and
minutes.
NOTE: You can choose a delay between 0 hours, 0 minutes up to
24 hours.
7 8
I
A conrmation screen appears; press Start again to set the Learn
Flow exercise.
J
The Learn Flow Starting conrmation screen appears, conrming
the delay time until the Learn Flow operation will start.
9 j
NOTE: Station ow rates can still be entered manually if desired.
See FloManager section for details.
NOTE: The Learn Flow Utility can take up to 5 minutes per station.