u
Loosen the grating.
u
Unscrew the cover of the filling opening.
u
Fill
new hydraulic oil into the oil reservoir
[2].
The oil level is correct if it is between the
green and red marking of the filling level
indicator [1] (green corresponds to the
maximum oil level).
u
Close the filling screw.
Fig. 79: Filling in oil
n
Transmission
Component Oil volume Oil designation
Transmission (Vario drive) Approx. 0.6 l SAE 75W-90 transmission oil
Do not mix different types of oil and do not use bio-oils.
u
Place
a sufficiently large collection vessel
underneath.
u
Open the oil drain plug on the oil reservoir
[1].
The oil drains immediately.
u
Drain the oil completely.
u
Close the oil drain plug again.
Fig. 80: Draining transmission oil
10. Maintenance and service
118
5903494 AERO GT 60.1
To Next Page
Loading...
