u
Access the menu Fertiliser settings
> Start calibration.
Fig. 41: Calibration test menu, page 1
[1] Fertilizer designation [2] Selecting
the section on which the
calibration test is performed
u
Enter the new designation in the input field
Fertiliser name.
u
Select the desired section for the calibration test.
w
To do so, check the bock under the section number.
Section 3 is selected by default.
u
Press the OK button.
Page 2 appears.
u
Enter the average working speed.
WARNING!
Risk of injury during calibration
Rotating machine parts and discharged fertilizer could cause injury
.
u
Before starting the calibration, ensure that all requirements have been met.
u
Observe the calibration chapter in the operator’s manual for the machine.
7. Calibration
AERO GT 60.1 5903494
67
To Next Page
Loading...
