CHAPTER 4
68 SmarTrax™ Calibration & Operation Manual
Touch the SmarTrax status widget during field operations to engage and disengage the SmarTrax features as
desired during field operations.
NOTE: The operator liability waiver must be accepted before the SmarTrax system can be enabled for
operation.
The SmarTrax steering may also be engaged using the following methods:
• Tap the foot switch or rocker switch to engage SmarTrax features without touching the Viper 4 display.
• Press the SmarTrax on-screen status widget to engage the SmarTrax during field operation.
UPDATING THE NODE
Refer to the Viper 4 Installation & Operation Manual (P/N 016-0171-539) for instructions on updating the node
software.
To Next Page
Loading...
