CHAPTER 5
74 SmarTrax™ Calibration & Operation Manual
MACHINE CONFIGURATION
CALIBRATION WARNING
FIGURE 3. SmarTrax Warning Screen
NOTE: The screen above should only appear the first time SmarTrax is accessed or if default settings have
been restored. Select Yes to continue.
If this prompt continues to appear and the default settings have not been restored, contact your local
Raven dealer for assistance.
SET UP MACHINE PROFILE(S) - OPTIONAL
1. Touch the SmarTrax area on the main Viper Pro screen.
2. Select Yes. The following screen will appear:
FIGURE 4. Machine Configuration Menu
To Next Page
Loading...
