Chapter 5
96 Viper Pro Installation & Operation Manual
9. To close the field boundary, select one of the following options:
• Continue driving the field boundary until the Viper Pro automatically closes the boundary. Viper
Pro will automatically close the boundary if the vehicle returns to a position within one boom or
implement width of the boundary start point.
• Touch the Finish button in the map area and select the ‘Field Zone Auto’ button to manually
close the field boundary. Viper automatically connects the boundary line from the current
position to the boundary starting point.
Importing a Field Boundary
If a boundary has been recorded previously and is in the shapefile format (.shp), the boundary may be
imported into the current job.
Note: Shapefiles must contain only one polygon. For help using the File Maintenance feature, see
Chapter 11, File Maintenance and Editing Reports.
How to Import a Field Boundary
1. Select the Scout tab.
2. Touch Record, then Zone. The Record Field Feature screen displays.
To Next Page
Loading...
