CHAPTER
7
Manual No. 016-0171-122 Rev. I 123
C hapter 7
Product Chaining
The product chaining feature allows the operator to link product tanks or bins together when applying product
to a field. When one tank or bin runs out, Viper automatically switches application to the next tank or bin to
continue applying product. This feature may be used to maximize capacity of a multi-tank or bin applicator and
to help reduce trips to refill product.
Note: Prior to starting a job using product chaining, verify that the nodes to be chained are set correctly
for the application. It may be necessary to adjust settings for a specific node to ensure that the
products are applied at the correct rate for the chained products.
To Next Page
Loading...
