5
Manual No. 016-0171-122 Rev. I 81
Using the Viper Pro System
6. Press Next. The final Product Chain Setup screen displays. Set the product name and options for chained
tanks or bins before any non-chained products.
Refer to the Product Setup section on page 81 for details on setting product information for products not
controlled in a product chain.
Product Setup
1. Press Next. The Product #1 Setup screen displays.
Note: If a product chain is set up for the new job, the product setup screen for the next available non-
chained product will be displayed.
2. Using the screen keyboard, enter a product name in the Product Name field.
3. Touch the Booms button. Select the desired boom sections which will be used to apply the product and
touch OK.
4. To apply a prescription map to the job, enable the VRC option.
To Next Page
Loading...
