APPENDIX
E
Manual No. 016-0171-122 Rev. I 261
A ppendi x E
Using the Front Panel
Program with the
Viper Pro System
The Front Panel Program may be used to configure Raven DGPS receivers only (e.g. Invicta 110, 115, or
Phoenix 200).
Initializing the Front Panel Program
Note: The Front Panel program cannot be used if a SmarTrax or TM-1 Tilt Module is installed between
the field computer and DGPS receiver.
1. Touch Front Panel from the Program Selection Menu.
To Next Page
Loading...
