CHAPTER
9
Manual No. 016-0171-122 Rev. I 171
C hapter 9
Using AccuBoom™
The AccuBoom, automatic boom section control feature, allows the Viper Pro system to automatically control
boom sections in reference to coverage or spray/no-spray zone maps. In addition, field boundaries recorded
with the AccuBoom feature enabled will automatically set up a no-spray boundary around the target area to
help eliminate over spray and wasted chemicals.
When enabled, the AccuBoom feature will automatically turn off an active boom section as it enters an area
where product has previously been applied. As the boom section leaves the previously applied area,
AccuBoom turns the boom section back on.
The following sections offer instructions on setting up and using the AccuBoom feature with the Viper Pro field
computer. Contact a local Raven dealer for more information and available kits for specific machines.
To Next Page
Loading...
