Chapter 6
112 Viper Pro Installation & Operation Manual
Set A-B Line by Heading
An A-B Line can also be created by using the Set B by Heading feature. To set an A-B path using a compass
heading:
1. Touch the ‘Set B by Heading’ icon along the bottom of the Guidance display.
The A point is set when the ‘Set B by Heading’ icon is selected. The Set A-B Line By Heading screen will
display.
2. Select one of the following to enter the heading for the A-B Line:
a. Touch one of the compass heading arrows to set the heading along a compass heading.
b. Touch the Use Current Heading button to use the current vehicle heading shown in the center of the
compass display.
c. Use the on-screen keypad to enter any heading between 0 and 360°.
To Next Page
Loading...
