Chapter 3
16 Viper Pro Installation & Operation Manual
Cable Platforms and Connections
Two cable platform options are available for use with the Viper Pro field computer. Each platform offers a range
of optional features which can be added to the control system at any time.
The Viper Pro field computer may be installed with either the generation 1 or generation 2 cable platform.
NOTICE
Please review the Raven CANbus Network
Installation Manual for installation instructions
for the specific cable platform being installed
with the field computer prior to beginning
installation. Contact a local Raven dealer for
assistance or to purchase additional
components necessary to set up the CANbus
system.
CAUTION
Viper Pro field computers with hardware
revision A or higher should be connected
directly to the vehicle battery.
Field computers with no revision (“Rev -” or
empty rev box on Viper Pro serial number tag)
should be connected to a clean, controlled
power source.
To Next Page
Loading...
