Chapter 5
104 Viper Pro Installation & Operation Manual
To Enter Report Information
1. With the job file open, touch the Menu button in the lower, right corner of the display and select Report.
2. The Customer Information screen will display.
Customer Information
3. Use the Customer Information screen to enter the date of the application and the customer name, address,
and any identification information associated with the customer file.
Note: The Viper Pro will store customer information entered on the field computer. For future jobs, the
operator may select the customer name from the drop down list and Viper Pro will automatically
enter the associated customer data.
4. Verify the customer information and touch Next to display the Field Information screen.
Field Information
5. Use the Field Information screen to enter field information and the crop type if applicable.
Note: The Viper Pro will store field and crop information entered on the field computer. Select a field
name or crop type entered during a previous operation and the field computer will automatically
enter the information from the previous job.
6. Verify the field and crop information and, if necessary, edit the displayed report information before touching
the Next button to display the next Field Information screen.
To Next Page
Loading...
