5
Manual No. 016-0171-122 Rev. I 87
Using the Viper Pro System
Application Rates Area
Use the Application Rates area to quickly check the status of each configured product node or control channel
during product application.
Note: The “Application Rates” heading will be hidden if multiple product nodes or control channels are
enabled to allow all information to be displayed on the main screen.
The application rates area displays the target (R
T
) and actual (R
A
) product application rates for each node or
channel and the selected control mode for each product. The following control mode indicators are displayed
in the application rates area.
The application area also provides quick and convenient access to make adjustments to the product
application rates and control mode for each product in the display. Touch within the application rates area to
view the Application Control prompt.
Control Mode. Touch the Off, Man (manual), or Auto (automatic) to select the control mode for the available
product nodes or control channels.
Letter Description
O The product is off.
M The product is being applied in the manual mode.
A The product is being applied in the automatic mode.
Node or Channel
Number
Rate Bump
Buttons
To Next Page
Loading...
