Raven Viper Pro - Appendix J Wireless Communications and Remote Service; Wireless Communication Status

Manual No. 016-0171-122 Rev. I 265
Enabling Tiered Booms
1. Touch the Product Control area in the main screen. The CAN Controller Status screen displays.
2. Touch the Product Control Settings area. The Node 1 Settings screen is displayed.
3. Touch Next until the Node 1 Settings screen displays Tier 1 Max, Tier 2 Max, and % Tier Disable.
4. Enter the desired Tier 1 Max, Tier 2 Max, and % Tier Disable values.
5. Touch OK. Viper saves the tier settings and returns to the CAN Controller Status screen.