5
Manual No. 016-0171-122 Rev. I 71
Using the Viper Pro System
5. When the correct recommendation is selected, touch the Next button to display the Assign
Recommendation to Channel screen.
This screen displays the available control channels and any recommendations available for the selected
field. If the Viper is controlling more than one product via a CANbus, the Chain Profile selection will be
displayed at the top of the screen.
For instructions on completing the job set up process, continue to the Selecting Control Channels section
on page 74. Proceed to the Assign or Create a Product Chain Profile section on page 72 for instructions on
enabling the product chaining feature with the AgX recommendations.
To Next Page
Loading...
