Raymarine E-Series - Autopilot Setup and Emergency Procedures

7.1 Enabling the autopilot control
function
1. Press the MENU button.
2. Select System Setup.
3. Select System Integration.
4. Use the Autopilot Control menu item to select the Enabled
option.
7.2 Disengaging the autopilot in an
emergency
While following a route using the autopilot:
1. Press and release the POWER button.
2. Press the PILOT STANDBY softkey.
The autopilot is disengaged, and put into standby mode.
104 E-Series Widescreen User reference