4.5 Saving user data and user settings
You can save user data (waypoints, routes, and tracks) or user
settings to a memory card for later retrieval.
Type of data Description Notes
User data (waypoints) Saves all waypoints to a
single archive le.
Only 1 waypoints archive
le can be saved per
memory card.
User data (routes) Saves all routes to a
single archive le.
Only 1 routes archive
le can be saved per
memory card.
User data (tracks) Saves all tracks to a
single archive le.
Only 1 tracks archive
le can be saved per
memory card.
User settings
Saves the settings
you’ve made in the
Setup Menus to a single
archive le.
You can save 1 user
settings archive le
per memory card for
each product Series
(C-Series, E-Series,
or G-Series). However,
you can NOT retrieve the
settings from a Series
to a different Series (for
example, G-Series to
E-Series).
Note: Raymarine recommends that you save your user data and
user settings to a memory card on a regular basis.
Saving user settings to a memory card
Note: Raymarine strongly recommends that you save settings
to a separate memory card, and NOT to a chart card containing
cartography.
1. Insert card in to the card slot.
2. Select the DATA button.
3. Select the SAVE AND RETRIEVE SETTINGS softkey.
4. Select the SAVE TO CARD softkey.
Retrieving user settings from a memory card
Note: Raymarine strongly recommends that you save settings
to a separate memory card, NOT to a chart card containing
cartography.
1. Insert card in to the card slot.
2. Select the DATA button.
3. Select the SAVE AND RETRIEVE SETTINGS softkey.
4. Select the RETRIEVE FROM CARD softkey. This option is only
available if a suitable memory card containing a system settings
archive le is in the card slot.
Saving data to a memory card
Note: Raymarine strongly recommends that you save data to
a separate memory card, and NOT to a chart card containing
cartography.
1. Insert card in to the card slot.
2. Select the DATA button.
3. Select the ARCHIVE AND TRANSFER softkey.
4. Select the SAVE TO CARD softkey.
5. Use the SELECT LIST softkey to select the type of data that you
want to save (Waypoint, Route, or Track).
46 E-Series Widescreen User reference
To Next Page
Loading...
