Raymarine E-Series User Manual

charts is subject to the supplier’s End-User Licence Agreement
included in the documentation for this product or supplied with the
memory card (as applicable).
Raymarine does not warrant that this product is error-free or that it
is compatible with products manufactured by any person or entity
other than Raymarine.
This product uses digital chart data, and electronic information from
the Global Positioning System (GPS) which may contain errors.
Raymarine does not warrant the accuracy of such information and
you are advised that errors in such information may cause the
product to malfunction. Raymarine is not responsible for damages
or injuries caused by your use or inability to use the product, by the
interaction of the product with products manufactured by others, or
by errors in chart data or information utilized by the product and
supplied by third parties.
Chart cards and memory cards
Compatible cards
The following types of memory or chart card are compatible with
your Raymarine system:
• CompactFlash (CF)
• micro Secure Digital (microSD)
• micro Secure Digital High-Capacity (microSDHC)
Note: microSD and microSDHC cards require the optional
Raymarine CF / microSD card adaptor. Only the ofcial
Raymarine adaptor is compatible with your system.
Chart cards
Your system is pre-loaded with electronic charts for your region. If
you wish to use different chart data, you can insert compatible CF
chart cards into the CompactFlash card slot on your unit. If you
want to use microSD or microSDHC chart cards, you must purchase
the optional CF / microSD card adaptor and insert it into the
CompactFlash card slot on your unit. The microSD or microSDHC
chart card must be inserted into the adaptor.
Use branded chart cards and memory cards
When archiving data, Raymarine recommends the use of quality
branded memory cards. Some brands of memory card may not
work in your unit. Please contact customer support for a list of
recommended cards.
EMC conformance
Raymarine equipment and accessories conform to the appropriate
Electromagnetic Compatibility (EMC) regulations for use in the
recreational marine environment.
Correct installation is required to ensure that EMC performance is
not compromised.
Suppression ferrites
Raymarine cables may be tted with suppression ferrites. These
are important for correct EMC performance. If a ferrite has to be
removed for any purpose (e.g. installation or maintenance), it must
be replaced in the original position before the product is used.
Use only ferrites of the correct type, supplied by Raymarine
authorized dealers.
Important information
11

Raymarine E-Series Specifications

General

Brand	Raymarine
Model	E-Series
Category	Monitor
Language	English