5. Enter your new waypoints password (1 to 16 characters, and
case sensitive).
6. Press the OK button.
7. Repeat Steps 5 to 6 to conrm the password.
8. Enter a hint to help you remember the password (optional).
9. Press the OK button.
Disabling password protection for waypoints
1. Press the MENU button.
2. Select the System Setup menu item.
3. Select the Waypoint Password Setup menu item.
4. When prompted, enter your existing waypoints password.
5. Press the OK button.
6. Select the OFF option for the Enable Password menu item
7. Press the OK button.
5.2 Routes
A route is a series of waypoints typically used to assist with passage
planning and navigation.
A route is displayed on screen as a series of waypoints linked by a
line.
Route features
There are a range of route features for building, navigating and
managing routes.
Route features are accessed from:
• the chart application — by positioning the cursor over an
existing route on the chart.
• the chart application — by using the Navigation Options
softkey.
• the home screen — by selecting My Routes. This displays the
Routes list.
The route features allow you to:
• Build a temporary route for immediate use (Quick Route).
60 E-Series Widescreen User reference
To Next Page
Loading...
