6. To save all items of that type of data, select the SAVE ALL...
softkey.
7. To save an individual item of data, select the item from the list
and select the SAVE... softkey.
Retrieving data from a memory card
1. Insert card in to the card slot.
2. Press the DATA button.
3. Select the ARCHIVE AND TRANSFER softkey.
4. Select the RETRIEVE FROM CARD softkey.
5. Use the SELECT LIST softkey to select the type of data that you
want to save (Waypoint, Route, or Track).
6. To retrieve all items of that type of data, press the RETRIEVE
ALL... softkey.
7. To retrieve an individual item of data, select the item from the list
and select the RETRIEVE... softkey.
Note: If the type of data you have selected already exists in the
system memory, use the softkeys to select a suitable action:
retrieve as new data, replace existing data, or cancel.
Erasing data from a memory card
1. Insert the card in to the card slot.
2. Press the DATA button.
3. Select the ARCHIVE AND TRANSFER softkey.
4. Select the ERASE FROM CARD softkey.
5. Use the SELECT LIST softkey to select the type of data you
want to erase.
6. To erase all the data, select the ERASE ALL... softkey.
7. To erase an individual item of data from the list, highlight the
relevant entry in the list and select the ERASE... softkey.
4.6 Transferring data using NMEA
You can transfer waypoints or routes to and from your multifunction
display and an external instrument, using NMEA.
Transferring waypoint and route data using
NMEA
With NMEA-compatible equipment powered on and connected to
your system:
1. Press the DATA button.
2. Select the ARCHIVE AND TRANSFER softkey.
3. Select the TRANSFER ON NMEA softkey.
4. Select the SEND WPTS ON NMEA, SEND RTES ON NMEA, or
RECEIVE ON NMEA softkey, as appropriate.
Note: Select the STOP TRANSFER softkey at any time to abort
the transfer operation.
Managing display data
47
To Next Page
Loading...
