Function Description Options
Color Palette (Digital only) The color palette options enable you to customize the look of the radar display for
different situations, as follows:
• Bold — uses high color gain, predominately red, to show weak targets more
intensely.
• Professional 1 — high resolution palette that uses the full color range to display
the information discovered by the scanner, just the strong returns are red.
• Professional 2 — high resolution palette, displays weaker targets in browns
with more intense targets displayed in yellows.
• Pathnder — similar to the Pathnder color palette.
• Night Vision — green.
• Bold
• Professional 1
• Professional 2
• Pathnder
• Night Vision
EBL Reference The measurement point used for reference when measuring distances using
Electronic Bearing Lines (EBLs) and range rings in the chart application. The
options are Magnetic/True North, or Relative.
• Mag/True
• Relative
Timed Transmit
Controls the radar’s timed transmission power-save mode. • On
• Off
Transmit Period
When ON, the scanner performs the number of scans specied and then shuts
down for the number of minutes specied by the Standby Period setting.
• 10 SCANS
• 20 SCANS
• 30 SCANS
Standby Period Indicates the number of minutes that the system shuts down - the scanner does
not rotate and the display is in standby mode.
• 3 MINS
• 5 MINS
• 10 MINS
• 15 MINS
Bearing Alignment
Enables you to make corrections for display azimuth error. Refer to Installation Guide
Radar Advanced Setup
Advanced setup options.
Refer to Installation Guide
Using radar
147
To Next Page
Loading...
