Move your nger up and down the screen to tilt the camera
up or down.
Move your nger left and right on the screen to rotate the
camera left or right (panning).
Note: You cannot zoom the thermal camera image using the
touchscreen. You must use the multifunction display’s Range key
(see below), or the thermal camera’s optional Joystick Control
Unit (JCU).
You can also use a combination of the UniControl and range keys
to manipulate the thermal camera view. This method is ideal for
ner control over the camera and is particularly useful in rough sea
conditions.
UniControl — is used for rotating the camera left or right
(panning), or tilting the camera up or down.
Range key— is used to zoom in and out.
Thermal camera home position
The home position is a preset position for the camera.
The home position usually denes a useful reference point — for
example, straight ahead and level with the horizon. You can set the
home position as required and to return the camera to the home
position at any time.
The home icon appears on-screen momentarily when the
camera returns to the home position. The icon ashes when a
new home position is set.
Resetting the thermal camera to the home position
In the thermal camera application:
1. Select the CAMERA HOME softkey.
The camera returns to its currently dened home position, and
the “Home” icon appears on-screen momentarily.
Setting the thermal camera home position
In the thermal camera application:
1. Use the trackpad or rotary control to move the camera to the
desired position.
232 E-Series Widescreen User reference
To Next Page
Loading...
