Menu item Description Options
Bearing Mode Determines how all bearing and heading data is displayed in.
This does not affect how the chart or radar displays are drawn.
• True (default)
• Magnetic
MOB Data Type
Determines whether positional data or dead reckoning is
displayed. Assuming that your vessel and the Man Overboard
(MOB) are subject to the same tide and wind effects, the dead
reckoning setting normally gives a more accurate course.
• Dead Reckoning
• Position (default)
Variation Source This setting compensates for the naturally occuring offset
of the earth’s magnetic eld. When set to Auto, the system
automatically compensates, and displays the compensation
value in brackets. To enter your own compensation value, use
the Manual option, then specify the value using the Manual
Variation setting (see below).
• Auto (compensation value displayed in
brackets) (default)
• Manual
Manual Variation
When the Variation Source menu item is set to Manual (see
above), you use the Manual Variation setting to specify the
compensation value that you want to use. This value is also
transmitted to any other connected Raymarine instruments.
• 0 degrees East (default)
• Range: 0 to 30 degrees East or West
•
Language
Determines the language that will be used for all on-screen text,
labels, menus and options.
Ground Trip Reset
Resets the chosen ground trip distance counter to zero.
• Ground Trip 1 Reset
• Ground Trip 2 Reset
• Ground Trip 3 Reset
• Ground Trip 4 Reset
Settings Reset
Resets all system setup menus, including page sets and the
databar, to the factory default settings. Waypoints, routes and
tracks are NOT deleted.
Reset Defaults conrmation
• YES
• NO
246 E-Series Widescreen User reference
To Next Page
Loading...
