Symbol
Radar
power
mode Description
Off Scanner powered off when radar not
required, but display is in use for other
applications, such as the chart. When
selected, the system counts down.
During this time you cannot re-power
the scanner.
Timed
Transmit
Scanner switches between
on/transmitting, and standby
mode. Scanner goes into power save
mode when constant use of radar is
not required.
AIS status symbols
AIS status is indicated by a symbol in the databar.
Symbol Description
AIS unit is switched on and operating.
AIS currently unavailable.
AIS unit is switched off, or not connected.
Symbol Description
AIS unit is in Silent Mode.
AIS unit is in Silent Mode, with active alarms.
AIS unit is connected and switched on, but has
active alarms.
AIS unit is connected and switched on, but the
dangerous and lost alarm is disabled.
Sonar status symbols
The sonar (DSM) status is indicated in the databar.
Symbol Description
Symbol animated: the DSM is
connected and transmitting.
Symbol static: the DSM is connected
but not transmitting.
Symbol greyed-out: the DSM is not
connected, or is not detected.
36 E-Series Widescreen User reference
To Next Page
Loading...
